Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. General usage remarks
• The original anvils assembled on both measurement axes are lapped in position
to guarantee an optimum measurement. Any disassembly of these anvils can
lead to a reduction in the accuracy of the instrument.
• The tailstock was positioned to have 0.5mm prestress in the probe zero position.
• Activating the lever opens the anvils. Releasing the release lever too sharply
E
can have a harmful influence on the probes and the measurement accuracy.
• It is advisable to check the reference (origin) during use.
• Monitor the cleanliness of the moving spindle. If necessary clean with light ben-
zene. Using a cloth that could leave residual particles is not recommended.
• Certain components, notably the headstock clamp screws are sealed after
assembly and consequently must not be removed. Any work on these compo-
nents by a third party can lead to loss of the guarantee.
2. Use
2.1 Adjustable release lever
The movable measuring spindle is retracted by means of the adjustable lever (7). The
position of the lever can be adjusted to suit the location of the workpiece. In order to
change the position, pull the lever out axially and move it to the desired position.
4
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
