EBARA Ego Bedienungs- Und Wartungshandbuch Seite 27

Configuration Description
Run Shows when pump is running
Operate Shows when pump is standby
Error [Default] Shows when pump has an error
No function Relay output doesn't show anything
5.1.4 ETHERNET
The pump has a built in web server which allows you to access your pump directly via an existing Ethernet connection.
The web server uses HTML pages to set/view:
• Regulation mode settings
• Regulation parameters (power, RPM, head, flow)
• Relay settings
• External control inputs settings
• Current and previews error
• Pump statistics (power consumption, run time and other).
5.1.4.1 HTML PAGES
There are five available HTML pages that offer different options:
1. Overview (default page when you connect to the pump, web page OVERVIEW) displays pump operation summary like:
• Power consumption,
• Grid current,
• RPM,
• Estimated head,
• Estimated flow,
• Estimated efficiency,
• Motor status,
• Heatsink temperature,
• Operating hours,
• Number of restarts,
• Energy consumed,
• Remote control.
2. Pump settings (web page PUMP) is meant to provide regulation and control (input and output) settings. It has control over:
• Pump head(Limit head setting),
• Ratio between head and flow HQ% (Hmax proportional to Q setting),
• RPM limit (Limit rpm to setting),
• Power limit (Limit power to setting),
• Grid current limit (Limit grid current to setting),
• Heatsink limit (Limit heatsink temperature to setting),
• Relay control (Switch relay control when setting),
• Input control (Input Il and I2 setting),
Setting can be saved to permanent memory by pressing the SAVE button. Pressing TEST you will set the setting, but will
not save them, previous setting can be restored by pressing RESTORE button.
27
GB