Care And Maintenance; Cleaning The Housing; Cleaning The Grease Filters - hanseatic SY-3288AIS-E3-C40-L14-900 Gebrauchsanleitung

Page EN-10

Care and maintenance

Care and maintenance
WARNING
Risk of injury!
Before cleaning the exhaust hood or
■
changing the fi lter, pull out the mains
plug. If the mains plug is diffi cult to
access, switch off or pull out the cor-
responding fuse.
CAUTION
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
Grease residue on the exhaust hood
■
or in the grease fi lters can catch fi re
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease fi lters reg-
ularly.

Cleaning the housing

NOTICE
Risk of damage to property!
Do not use any sharp objects or scour-
■
ing powders, as these can scratch the
surface.
We recommend cleaning the surfaces of the
exhaust hood after every use.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent.
• Clean glass surfaces with standard glass
cleaner.

Cleaning the grease filters

NOTICE
Risk of damage to property!
Handle the grease fi lters carefully to
■
avoid bending or creasing the fi ne
mesh.
Only reinsert the grease fi lters after
■
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 60 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
power to the corresponding main fuse.
2. Push the locking mechanism of the
grease filter (17) to the back and care-
fully remove the grease filter by pulling it
downwards.
3. Wash the grease filters in a dishwasher or
in the sink like ordinary dishware.
4. If the grease filter is completely dry, insert
the grease filter by placing the back end
in the recess below in the exhaust hood.
5. Slide the lock backwards, hinge the
grease filter upwards to close it, and re-
lease the lock again.
6. Reconnect the power supply.
(17)