Initial Controller Setup - OEG KSW-E series Bedienungsanleitungen

INITIAL CONTROLLER SETUP

KSW-E*, KSW*, KS2W* differential controllers are equipped with an innovative solution
"Easy start", which allows initial setup of the controller in only two steps.
When you connect the controller to the power supply for the first time, the software ver-
sion is shown. Next, the first step appears on the screen.
STEP 1
Using buttons and
Press the button
If you cannot find the required language on the first screen, move to the fol-
lowing screens by pressing the button
User and settings manual
you select the required language.
to confirm the selected language.
After selecting the language, the controller requires
confirmation of the selection by pressing the
button.
If you accidentally selected the wrong language, go
back to reset the language by pressing button
.
8
.