Technical Data - OEG KSW-E series Bedienungsanleitungen

TECHNICAL DATA

Technical characteristics - controller
Dimensions: ................................................................. 144 x 96 x 49 mm
Controller weight .......................................................... 465 g
Controller housing ........................................................ ASA + PC - thermoplastics
Supply voltage ............................................................. 230 V ~ , 50 Hz
Power consumption ..................................................... 5 VA
Cross-sectional area of network conductors ................ 0.5 to 1.5mm2
Degree of protection .................................................... IP20 according to EN 60529
Safety class.................................................................. I according to EN 60730-1
Permissible ambient temperature ................................ 5 °C to +40 °C
Permissible relative humidity ....................................... max. 85 % rH at 25 °C
Storage temperature .................................................... -20 °C to +65 °C
Relay output
R1 ................................................................................ pot. free, max. 4 (1) A ~, 230 V ~
Triac output
R2, R3 .......................................................................... 1 (1) A ~, 230 V~
External control signal Y2, Y3
PWM .............................................................................. 1 kHz, 5 mA, 13.2 V
Analogue ......................................................................... 0÷10 V, max 3 mA
Program timer Type ..................................................... 7-day program timer
Min. interval.................................................................. 15 min
Accuracy of the installed program timer ....................... ± 5 min / year
Program class .............................................................. A
Data storage without power supply .............................. min. 10 years
Technical characteristics - sensors
Temperature sensor type ............................................. Pt1000 or KTY10
Sensor resistance
Pt1000 ......................................................................... 1078 Ohm at 20 °C
KTY10 .......................................................................... 1900 Ohm at 20 °C
Temperature scope of use
Outdoor sensor AF ....................................................... -25 ÷ 65 °C, IP32
Immersion sensor TF ................................................... -25 ÷ 150 °C, IP32
Surface sensor VF ....................................................... 0 ÷ 85 °C, IP32
Gas exhaust sensor CF ............................................... 20 ÷ 350 °C, IP32
Min. cross-sectional area of sensor cables .................. 0.3 mm2
Max. length of sensor cables ....................................... max. 30 m
Technical data
50