Factory Settings - OEG KSW-E series Bedienungsanleitungen

FACTORY SETTINGS

In the menu "FACTORY SETTINGS" there are software tools to help with setting the
controller.
RESET OF ALL CONTROLLER PARAMETERS
Restores all settings of parameters P1, P2, P3, S1 (except S1.1), S2, S3, W,
F1 and F2* to default values.
RESET OF TIME PROGRAMS
Restores default time programs.
RESET OF ALL CONTROLLER SETTINGS AND RESTART INITIAL SETUP
Restores all parameters to default values and starts the initial setup.
SAVE USER'S SETTINGS
Save current parameter values as user's settings.
All sensors marked with an error (ERR) are reset to status - - - (disconnected
sensor).
LOAD USER'S SETTINGS
Load previously saved user's settings.
* Depends on the controller model.
Before performing of the commands stated above, the
controller requires a confirmation of the selected com-
mand.
43 Service settings manual