Installation Manual; Controller Installation; Wall Installation - OEG KSW-E series Bedienungsanleitungen

INSTALLATION MANUAL

CONTROLLER INSTALLATION

Install controller in dry indoor area away from strong electromagnetic fields.
The controller is foreseen for wall installation or panel installation with standard cutout of
138 x 92 mm.

WALL INSTALLATION

The installation onto a wall is carried out in the following way:
a
a
b
d
c
a
b
b
1. Unscrew both screws (a) from the controller (b) and remove it from the base (c).
2. Cutout the drilling template from package, mark drilling holes on the wall and drill them.
3. Mount the socket on the wall with four screws.
4. Carry out electrical connection, put the controller (a) back into the base, and fasten it
with screws (b).
Installation manual 44