Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
C
Please remember that the
manufacturer shall not be held
liable if the information given in the
instruction manual is not observed.
Points to be considered when re-
transporting your refrigerator
1. Your refrigerator must be emptied
and cleaned prior to any
transportation.
2. Shelves, accessories, crisper and
etc. in your refrigerator must be
fastened securely by adhesive tape
against any jolt before repackaging.
3. Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on
the package must be followed.
C
Always remember...
Every
recycled
■
indispensable source for the nature and
for our national resources.
If
you
wish
■
recycling
the
packaging
you can get further information from
the environmental bodies or local
authorities.
Before operating your
refrigerator
Before starting to use your refrigerator
■
check the following:
1. Is the interior of the refrigerator dry
and can the air circulate freely in the
rear of it?
2. Insert the 2 plastic wedges onto the
rear ventilation cover as illustrated
in the following figure. To do this,
remove the screws on the product
and use the screws given in the
same pouch.
material
is
an
to
contribute
materials,
Plastic wedges will provide the
required distance between your
refrigerator and the wall in order to
allow the air circulation.
3. Clean the interior of the
refrigerator as recommended in
the "Maintenance and cleaning"
section.
to
4. Plug the refrigerator into the wall
outlet. When the door is open the
respective interior light will come
on.
5. You will hear a noise as the
compressor starts up. The liquid
and gases sealed within the
refrigeration system may also
give rise to noise, even if the
compressor is not running and this
is quite normal.
6. Front edges of the refrigerator may
feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
41
ENGLISH
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
