Floor Balance Adjustment; Adjusting The Gap Between The Upper Door - Grundig GQN 1360 XA++ Bedienungsanleitung

If the floor is covered with a carpet,
■
your product must be elevated 2.5 cm
from the floor.
4. Place your refrigerator on an even
■
floor surface to prevent jolts.
5. Do not keep your refrigerator in
■
ambient temperatures under 10°C.

Floor balance adjustment

A
If your refrigerator is unbalanced;
■
B
First unplug the product. The
■
product must be unplugged when
making the balance adjustment. There
is the risk of electric shock.
1
1- Ventilation cover is removed by
■
unscrewing its screws as illustrated in
the figure before the procedure. You
can balance your refrigerator by turning
the front legs of it as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction of
black arrow and raised when you turn in
the opposite direction. Taking help from
someone to slightly lift the refrigerator
will facilitate this process.
4
2 3
2. After the balance issue is remedied,
■
install back the ventilation cover and
fasten the screws.
■
3. Remove the screws fastening the
■
lower ventilation cover using a Philips
screwdriver.
Adjusting the gap between the
upper door
C
You can adjust the gap between
■
the fridge compartment doors as
illustrated in the figures.
Door shelves should be empty when
■
adjusting the door height.
43
ENGLISH