Reverb (Reverb); Pedal Fx (Pedal Effects) - Boss ME-80 Bedienungsanleitung

REVERB (Reverb)

This adds lingering stereo reverberations to the sound .
When the reverb is on, the indicator lights .
In Manual Mode and Memory Edit Mode, use the [CTL]/[REV] pedal to turn on and off .

PEDAL FX (Pedal Effects)

This produces a variety of effects using the unit's expression pedal .
Firmly pressing the toe of the expression pedal (while putting some weight into it) switches Pedal FX on and off .
When Pedal FX is off, the expression pedal functions as VOLUME (volume pedal) .
When PEDAL FX is on, the indicator will light .
* When you operate the expression pedal,
please be careful not to get your fingers
pinched between the movable part and the
panel . In places where small children are
present, make sure that an adult provides
supervision and guidance .
This adjusts the type of reverb and the size of the effect .
Type of Reverb Explanation
ROOM This simulates the reverberations inside a room . (Value: 0–49)
HALL This simulates the reverberations inside a hall . (Value: 0 .–49 .)
SPRING This models a spring reverb . (Value: .0 .–4 .9 .)
Choose the type of PEDAL FX .
Type of Effect
1 . WAH
2 . VOICE
3 . +1 OCT
4 . +2 OCT
5 . -1 OCT
6 . FREEZE
7 . OSC DELAY
8 . OD/DS
9 . MOD RATE
10 . DELAY LEV
Explanation
This is a wah effect .
This lets you create sounds that simulate a human voice .
This lets you continuously vary the pitch up to one octave higher than the
original sound .
* Play single notes .
This lets you continuously vary the pitch up to two octaves higher than the
original sound .
* Play single notes .
This lets you continuously vary the pitch up to one octave lower than the
original sound .
* Play single notes .
Firmly pressing the pedal switches the FREEZE function, which sustains the tone
of the guitar . Freeze is applied at the moment you press the pedal .
This lets you use the pedal alone to produce an oscillating delay that otherwise
would require you to carefully control both the FEEDBACK and TIME parameters .
This lets you control the DRIVE when using OD/DS effect .
* The [DRIVE] knob determines the maximum value of the range controlled with
the expression pedal .
This lets you control the RATE when using the MOD effect .
* The MODULATION effect's [RATE] knob determines the maximum value of the
range controlled with the expression pedal .
This lets you control the delay level when using the DELAY effect .
* The DELAY effect's [E . LEVEL] knob determines the maximum value of the
range controlled with the expression pedal .
Using the Effects
11