Speaker Combinations - Pioneer VSX-LX503 Bedienungsanleitung

Speaker combinations

• Up to two powered subwoofers can be connected in either combination.
Speaker
FRONT
Channels
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
7.1 ch
2.1.2 ch
3.1.2 ch
4.1.2 ch
5.1.2 ch
6.1.2 ch
7.1.2 ch
4.1.4 ch
5.1.4 ch
6.1.4 ch
7.1.4 ch
(*1) The Bi-AMP and ZONE speakers cannot be used simultaneously.
(*2) When using the ZONE 2 speakers (except when the ZONE 3 is used), it is necessary to connect the height speakers to the SURROUND BACK terminal. When
using both the ZONE 2 speakers and the ZONE 3 speakers, the Height 1 speakers cannot be used simultaneously with the ZONE speakers.
(*3) When using the Bi-AMP speakers, it is necessary to connect the Bi-AMP speakers to the HEIGHT 1 terminals, and the height speaker to the SURROUND BACK
terminals.
(*4) Height 1 speakers cannot be used simultaneously with the ZONE speakers.
(*5) Use an analog audio cable to connect the power amplifier to the PRE OUT SURROUND BACK jacks, then connect the surround back speakers to the power amplifier.
About the HEIGHT 1/HEIGHT 2
When connecting 2 sets of the height speakers, the combination of the height speakers that can be selected is as follows.
– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High
– Height 1 Speaker: Front High; Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled
Speaker (Surround Back)
When only 1 set of the height speakers is connected, 1 from the height speakers types can be selected.
Contents
SURROUND
CENTER SURROUND
Connections
≫
HEIGHT 1 HEIGHT 2
BACK
(*2) (*3)
(*2) (*3)
(*2) (*3)
(*2) (*3)
(*4)
(*4)
(*4)
(*4)
(*5) (*4)
(*5) (*4)
58
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫ ≫
ZONE 2 (*1)
Bi-AMP (*1)
(ZONE SPEAKER) (ZONE SPEAKER)
(*3) (*2)
(*3) (*2)
(*3) (*2)
(*3) (*2)
(*4)
(*4)
(*4)
(*4)
(*4)
(*4)
Setup
≫
ZONE 3 (*1)
(*2)
(*2)
(*2)
(*2)