Pioneer VSX-LX503 Bedienungsanleitung Seite 56

„ 7.1.4 Channel System + ZONE SPEAKER
MAIN ROOM
bm bl
bk 9
2 1
3
6
5 4
8 7
ZONE 2
bo bn
MAIN ROOM: This is an example of combining the top middle speakers at the front and the
rear high speakers at the rear to the 7.1 Channel System. The height speakers in front can be
selected from following 4 types. The height speakers that can be combined at the rear differ
depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front (
❏ Combination example when Top Middle Speakers are used at the front (
❏ Combination example when Front High Speakers are used at the front (
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front (
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback
in the main room (where this unit is located). The same source can be played back in the main
room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms.
• While ZONE 2 playback is being performed, Height 1 speakers installed in the main room
cannot play audio.
Contents
Power amplifier
p33)
p35)
p36)
Connections
≫
"Speaker Setup" settings during Initial Setup (
„
p38)
56
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
p156)
• Speaker Channels: 7.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select
the type of height speaker
actually installed.
• Height 2 Speaker: Select
the type of height speaker
actually installed.
• Zone Speaker: Zone 2
• Bi-Amp: No
≫