Pioneer VSX-LX503 Bedienungsanleitung Seite 136

„ Zone 3
Change the settings for Zone 3.
Setting Item Default Value
Output Level Fixed
Volume Limit Off
Power On Level Last
Setting Details
Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this
unitwhen outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier
intheseparate room
"Variable": Adjust on this unit
• When "Speaker" - "Configuration" - "Zone
Speaker" is set to "Zone 2/Zone 3", this setting is
fixed to "Variable".
Set the maximum value for Zone 3 to avoid too
high volume. Select "Off" or a value between
"-32 dB" and "+17 dB".
Set the Zone 3 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "-∞ dB", and
"-81.5 dB" to "+18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Contents Connections
≫
„ Remote Play Zone
Change the settings for remote play.
Setting Item Default Value
Remote Play Auto
Zone
136
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
When playing with AirPlay or Spotify Connect,
or when using the Music Server function to play
remotely from your PC, you can set whether to play
in the main room (where this unit is located) or in a
separate room (ZONE 2/ZONE 3).
"Auto": When the main room input is NET, music
is played in the main room. When the separate
room input is NET and the main room input is other
than NET, then the music is played in the separate
room.
"Main", "Zone 2", "Zone 3": Select when limiting the
play zone to a particular room. For example, when
playing only in the separate room, select "Zone 2"
or "Zone 3".
• This function may not work if playback is already
proceeding with the same network function.
≫