Source - Pioneer VSX-LX503 Bedienungsanleitung

Source

„ Input Volume Absorber
Adjust the volume level when there are differences in volume level among
multiple devices connected to this unit. Select the input selector to make the
setting.
Setting Item Default Value
Input Volume 0.0 dB
Absorber
„ Name Edit
Set an easy name for each input. The set name appears on the main unit's
display. Select the input selector to make the setting.
Setting Item Default Value
Name Edit Input name
• To name a preset radio station, press TUNER on the remote controller, select AM/FM,
and select the preset number.
Setting Details
Select a value between "-12.0 dB" and "+12.0 dB".
Set a negative value if the volume of the target
device is larger than the others and a positive
value if smaller. To check the audio, play back the
connected device.
• This function does not work in Zone 2/Zone 3.
Setting Details
1. Select a character or symbol with the cursors,
and press ENTER.
Repeat this operation to input up to 10
characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the
cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller will
remove all the input characters.
2. After inputting, select "OK" with the cursors, and
press ENTER.
The input name will be saved.
Contents Connections
≫
• This cannot be set if the "NET" "USB" or "BLUETOOTH" input is selected.
„ Audio Select
Select the priority for input selection when multiple audio sources are connected
to one input selector, for example, connections to both the "BD/DVD" HDMI IN
jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each
input selector. Select the input selector to make the setting. Note that some of
the default values cannot be changed.
Setting Item Default Value
Audio Select BD/DVD:
CBL/SAT:
GAME:
STRM BOX:
AUX:
CD:
TV:
128
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫
Setting Details
"ARC": When giving priority to the input signal from
HDMI ARC-compatible TV.
• This item can be selected only when "Hardware"
HDMI - "HDMI" - "Audio Return Channel" is set to
"Auto" and also the "TV" input is selected.
HDMI "HDMI": When giving priority to the input signal
from HDMI IN jacks
HDMI • This item can be selected only when the input to
be set is assigned to the HDMI jack in the "Input/
HDMI Output Assign" - "HDMI Input" setting.
"COAXIAL": When giving priority to the input signal
COAXIAL from DIGITAL IN COAXIAL jacks
• This item can be selected only when the input
OPTICAL to be set is assigned to the COAXIAL jack in
the "Input/Output Assign" - "Digital Audio Input"
setting.
"OPTICAL": When giving priority to the input signal
from DIGITAL IN OPTICAL jacks
• This item can be selected only when the input
to be set is assigned to the OPTICAL jack in
the "Input/Output Assign" - "Digital Audio Input"
setting.
"Analog": To always output analog audio regardless
of input signal
• This item can be selected only when the input
to be set is assigned to the AUDIO IN jack in
the "Input/Output Assign" - "Analog Audio Input"
setting.
Setup
≫ ≫