Clear Button; Scroll Buttons; Cursor Buttons; Tack Button - Singer 9960 Bedienungsanleitung

I. CLEAR BUTTON
UTILITY STITCH SEWING
If you changed the setting (mirror/reverse,
elongation, stitch width, length and thread tension)
of utility stitch pattern, you can return to preset
setting by pressing this button.
DECORATIVE & LETTER STITCH SEWING
By pressing this button, you can delete one
combined stitch pattern or all stitch patterns.
J. SCROLL BUTTONS
During stitch pattern selection, 5 patterns or letters
will scroll up or down by pressing these buttons.
K.CURSOR BUTTONS
When decorative & letter stitch sewing, you can
check and edit combined patterns or letters by
pressing these buttons.
L. TACK BUTTON
UTILITY STITCH SEWING
By pressing this button, you can sew a tack stitch
at the beginning and at the end of a stitch. (SEE
PAGE 19)
DECORATIVE & LETTER STITCH SEWING
If this button is pressed at the end of a decorative
stitch pattern, machine will stop automatically at
the end of the stitch pattern and tie off the stitch
with a locking stitch.
M. TWIN NEEDLE BUTTON
If you attach the twin needle, press this button.
Machine will reduce the stitch width.
(SEE PAGE 43)
TO TURN OFF THE
AUDIBLE BEEP
You can operate the machine without the audible
beep.
1. Turn off the power switch.
2. Turn on the power switch while pressing the
EDIT button and the function F1 button.
3. This function is kept off until the machine is
turned off.
This function turns off the single beep only.
Multiple beeps will not turn off.
13