Operation; Weighing; Incremental Weighing - Silvercrest Z31246A Bedienungs- Und Sicherheitshinweise

part-
ound
tery
If the scale is in the time mode
once to switch into the weighing mode.
1. Place the kitchen scale on a solid, flat surface.
uto- 2. Press the MODE button
n 3. Place the substance to be weighed on the scale. The
essed
time
time.
alue. 1. Follow steps 1 to 3 of the section on "Weighing" and
d up
n the 2. Add another substance to be weighed to the scale. The
ue.
d up 3. If you remove the added substance from the scale, the
4. If you remove all of the substances to be weighed from
nds,
5. Press the TARE button
6. Activate the TARE function only within a range of 3–2,500 g.
If there is no substance to be weighed on the scale and if 60
seconds elapses without a button being pressed or no movement

Operation

Weighing (Fig. A)
Note: Shortly before the scale switches into the weighing
mode, the scale shows "HELO" in the display for 1–2 sec-
onds.
unit indicator (g / lb'oz).
weight of the substance being weighed is shown in the
LC display .
1
Incremental weighing (Fig. A)
press the TARE button
and the TARE symbol
LC display shows the weight of the newly added sub-
1
stance.
LC display shows 0.
1
the scale, the LC display shows a negative value
ceases to be displayed.
, press the MODE button
5
once to change the weight
3
. The LC display
2
appears.
8
once and the TARE symbol
2
3
shows 0
1
.
9
8
GB/MT 41