Before First Use; Replacing The Battery; Operation - Silvercrest 385530 2107 Bedienungs- Und Sicherheitshinweise

protective gloves at all times if such
an event occurs.
In the event of a leakage of
batteries/rechargeable batteries,
immediately remove them from the
product to prevent damage.
Remove batteries/rechargeable
batteries if the product will not be
used for a longer period.
Risk of damage of the product
Only use the specified type of
battery/rechargeable battery!
Insert batteries/rechargeable
batteries according to polarity marks
(+) and (-) on the battery/recharge-
able battery and the product.
Use a dry lint-free cloth or cotton
swab to clean the contacts on the
battery/rechargeable battery and
in the battery compartment before
inserting!
Remove exhausted batteries/
rechargeable batteries from the
product immediately.
Before first use (Fig. C)
Remove all packaging materials from the product.
Turn the product over and place it on a soft underlay
to avoid scratching the surface. Loosen the screw
located at the cover of the battery compartment
on the back of the product.
Open the cover of the battery compartment
on the back of the product.
Pull out the insulation strip from the battery
compartment .
5
Close the cover of the battery compartment
and tighten the screw
Replacing the battery (Fig. C)
Turn the product over and place it on a soft underlay
to avoid scratching the surface. Loosen the screw
located at the cover of the battery compartment
on the back of the product.
Open the cover of the battery compartment
on the back of the product.
Remove the used battery, if present.
Insert a battery type CR2032 in the battery
compartment .
5
Note: Make sure you insert the batteries with the
correct polarity. This is indicated on the cover of
the battery compartment
Close the cover of the battery compartment
and tighten the screw

Operation

Set the product on a solid, level and flat surface to
weigh.
5
5
.
6
5
.
5
5
.
6
GB/IE/NI
6
5
6
5
9