Switching Off The Weighing Function; Troubleshooting - Silvercrest HG01046B Bedienungs- Und Sicherheitshinweise

Press the S/S
An M
12
Note: You can set the time period precisely to the second.
Press and hold the SEC button
that the time readout in the LC display runs faster.
Press the S/S
Note: You can pause the timer. To do this press the S/S
button.
A signal sounds as soon as set time period has elapsed.
Press any button to switch off the signal.
Note: Press and hold the S/S
3 sec to switch to weighing mode.

Switching off the weighing function

Note: If the appliance has not been used for about 3 minutes,
it will switch off automatically.
Press the S/S
manually in the weighing mode.

Troubleshooting

– If the LC display
weight on the appliance. Remove the excess load. Never
place a load of more than 5 kg onto the appliance.
– If the LC display shows " ", the batteries are discharged.
Change the batteries.
– If the LC display shows "UNST", wait for a few seconds.
– If the appliance does not work as expected, change the
batteries.
Note: The device contains delicate electronic components.
This means that if it is placed near an object that transmits
radio signals, it could cause interference. If the display in-
dicates a problem, move such objects away from it.
40 GB/MT
button
& S indicator appears in the LC display.
4
button to start the countdown.
button
shows "O-Ld", there is too much
6
once in the weighing mode.
7
or MIN button
8
button
approx. 2 sec to switch off
7
, so
9
for approx.
7