Before You Start; Activating The Battery; Getting Started; Switching On The Kitchen Scales / Weighing - Silvercrest SKW 5 B1 Bedienungsanleitung Und Sicherheitshinweise

7. Before you start

7.1 Activating the battery

Remove the strip from the battery compartment (5) on the bottom of the kitchen scales.
After removing the strip off the battery compartment (5), immediately place the scales
onto a solid, horizontal surface but don't apply any pressure on the scales. Wait until
the scales indicate "0 g". The scales have now been calibrated and are ready to be
used. In case that the scales don't show "0 g", read the chapter "The scales are
indicating wrong values".

8. Getting started

A solid surface is required to measure weight correctly. Thus always place the kitchen
scales on a solid, horizontal surface. Otherwise this can distort the measurement
result.

8.1 Switching on the kitchen scales / weighing

•
Briefly press on the weighing surface (1), applying a little pressure to switch the kitchen
scales on.
But you can also, for example, place a bowl with minimum 250 g or 0.55 lb on the
weighing surface (1). The kitchen scales switch on and display the measurement
result.
•
The selected unit of measure is indicated on the display (3).
Weight
Liquids
•
Press the UNIT button (4) to toggle through the units of measure in sequence as follows: g /
oz / lb:oz / ml / fl.oz
•
Place the foodstuff on the weighing surface (1).
•
The measurement result is shown on the display (3).
Unit of measure
g, oz, lb:oz
ml, fl.oz
SilverCrest SKW 5 B1
English - 27