Bosch HTD 6 Serie Serviceanleitung Seite 53

Replacing test screen HTD 6xx
i
Open the light box (refer to "Opening light box").
i
Remove the display unit (refer to the "Replacing
display unit" section).
1. Slacken off the grub screw and remove the adjuster.
2.
3. Remove the retaining ring.
4. Open up the back of the light box.
Robert Bosch GmbH
Component replacement | HTD 6xx, HTD 8xx | 53
5. Use a long screwdriver to remove the fastening
screws of the test screen bracket.
6. Take out the test screen assembly.
7. Fit and secure the new assembly.
8. Re-connect the display unit with the cable and
secure.
9. Close the light box.
en
|
1 692 106 011 2014-06-23