Bosch HTD 6 Serie Serviceanleitung Seite 49

Replacing spirit level
i
Refer to the "Opening light box" section.
1. Remove the screws of the spirit level.
2. Take out the spirit level.
3. Place a level tube on the light box.
4. Horizontally align the trolley in both directions.
5. Position the new spirit level with the fastening
screws on the springs.
6. Adjust the spirit level by way of the fastening screws.
Robert Bosch GmbH
Component replacement | HTD 6xx, HTD 8xx | 49
Replacing camera - HTD 8xx
i
Refer to the "Opening light box" section.
i
Refer to the "Replacing spirit level" section.
1. Slacken off the retaining screws and remove the
camera board.
2. Unplug the connector from the camera board.
3. Plug in the connector at the new camera board.
4. Secure the camera board with the two screws.
5. Insert the spirit level in the light box.
6. Close the cover of the light box.
i
Refer to the "Camera calibration" section.
7. Close the light box.
en
|
1 692 106 011 2014-06-23