Bosch HTD 6 Serie Serviceanleitung Seite 50

en 50 | HTD 6xx, HTD 8xx | Component replacement
Replacing lens
i
Refer to the "Light box" section.
1. Remove the two screws at the cable holder.
2. Remove the cable from the display unit and lay
aside.
3. Remove the two screws from the front part of the
light box and grasp hold of the lens frame with the
other hand.
4. Detach the lens frame together with the lens from
the light box.
|
1 692 106 011 2014-06-23
5. Attach the new lens unit to the light box.
6. Connect up the display unit with the connecting
cable.
7. Fit the cable holder.
8. Close the light box.
Robert Bosch GmbH