Filter Dedusting (Dedusting By Rotation) En - Abicor Binzel FES-200 W3 Betriebsanleitung

5 Functional description
13 Dispose of the dust collecting bag and the disposable cloth according to the local regulations.
 12 Disposal on page EN-26
5.2 Filter dedusting (dedusting by rotation)
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Disconnect the mains plug.
• Before performing any maintenance and cleaning work, suitable safety measures must be taken.
• Maintenance and cleaning work on the fume extraction system may only be carried out in areas with
• Always wear your personal protective equipment when performing maintenance and cleaning work.
• The personal protective equipment includes protective clothing, safety goggles, respirator mask
• Nobody without personal protective equipment may stay near the dust collecting drawer when it is
NOTICE
• This procedure must be carried out when the system is not in operation.
• Use only dry and oil-free compressed air (max. 4 bar).
• If the input pressure is >5 bar, the excess pressure escapes sidewise through the pressure relief valve.
1
1 Seal plug
Fig. 4 Filter dedusting
EN - 14
DANGER
CAUTION
locally filtered forced ventilation.
Class P3, protective gloves and safety shoes.
being filled with the separated dust.
2
2 Filter dedusting (dedusting by rotation)
FES-200 W3
3
3 Compressed air connection
4 Valve lever
4