Safety; Intended Use - Holzmann BTS 75-2 Betriebsanleitung

11

SAFETY

11.1

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be informed
about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Sanding of metallic materials.
Any manipulation of the machine or its parts is a misuse, in this case
and its sales partners cannot be made liable for ANY direct or indirect damage.




Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
 The operation of the machine outside the stated technical limits described in this
manual is forbidden.
 The operation of the machine without provided protective devices is prohibited.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being
certified is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is
forbidden.
 The unattended operation on the machine during the working process is forbidden!
 It is not allowed to leave the immediate work area during the work is being
performed.
HOLZMANN MASCHINEN GmbH
Use only abrasives allowable for this machine!
Never use a damaged abrasives!
Never use the machine with defective or without mounted guards!
The removal or modification of the safety components may result in damage
to equipment and serious injury!
www.holzmann-maschinen.at
W A R N I N G
HIGHEST RISK OF INJURY!!
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
HOLZMANN-MASCHINEN
BTS 75-2
18