Klarstein 10031629 Bedienungsanleitung Seite 8

Over Flow Pipe Assembly
• There are 2 different length pieces to the tube assembly, use the necessary length combination of pipes for
the amount of grain used in the basket.
• The mesh disc with 1 hole in the centre is the bottom piece. Before placing the false bottom into the grain
basket, please attach the extension tubes as required, as shown in the pictures. No need to over tighten.
• After the above steps, place the false bottom and over flow pipe into grain basket.
• Screw the 2 small stainless handles to the upper disc as shown in the picture below.
• Place the white screw cap cover onto the pipe when adding the brewing ingredients.
• After adding your ingredients to the basket, remove the white cap and slide the upper mesh disc onto the
central pipe, and lower onto the grain, with the 2 handles facing upwards.
• You are now ready to brew.
Display and Settings
8