Seltron ProMATIC WDC10 Bedienungsanleitung Seite 14

Liquid fuel boiler switch-off.
Solid fuel boiler switch-on.
Automatic switch over to summer heating mode.
Floor screed drying activated.
Operation with constant temperature of stand-pipe activated.
Remote switch-on.
Boost heating activated.
SYMBOLS FOR INDICATION OF TEMPERATURES AND OTHER DATA
Symbol
Description
Measured temperature.
Calculated or desired temperature.
Room temperature.*
Outdoor temperature.
Liquid fuel boiler temperature.
Solid fuel boiler temperature.
Gas boiler temperature.
Temperature of heat source obtained through BUS connection.
Combined fuel (liquid and solid) boiler temperature.
Heat source temperature - sensor in the pipeline.
Stand-pipe temperature.*
Return-pipe temperature.*
Domestic hot water temperature.
Heat accumulator temperature.
Solar collectors temperature.
Floor screed temperature. *
Boiler return-pipe temperature.
Exhaust gas temperature.
Temperature of the area where heat pump is installed.
*
The number by the symbol or inside the symbol marks the first or the second time program accordingly
User manual
- drying day
- duration of drying
14
.