Installation - QSC SPA2-60 Installationsanleitung

Installation

Ventilation
• Recommend 1RU (1.75 in / 44.45 mm) space above the amplifier.
• Minimum open space of 6 inches measured from back of amplifier.
NOTEE: QSC System Power Amplifiers contain advanced protection
circuitry which allows them to reduce output power in order to
maintain safe operating temperatures. Insufficient ventilation may
result in the amplifier reducing output power during normal
operation (indicated by Limiter/Protect LEDs illuminating red). To
reduce the possibility of thermal limiting, and allow proper heat
dissipation, we recommend that you keep the space directly above
and to the rear of these amplifiers free of obstacles.
EN
Select the Amplifier Installation Configuration
Choose one of the following configuration options:
A. One Amplifier 19-inch Rack (Left or Right Mount) on page 3
B. Two Amplifiers 19-inch Rack (Front or Rear Facing Out) on page 3
C. One Amplifier Half Rack (Front or Rear Facing Out) on page 4
TD-000500-00-D
D. Under Table or on Wall on page 4
E. Free-Standing on Desk/Table on page 5
F. Plenum Installation on page 5
2
2
— Figure 1 —
1