Front Panel; Rear Panel - QSC SPA2-60 Installationsanleitung

Front Panel

Limiter / Protect
Red – Protect / Mute
Orange – Limiter on

Rear Panel

EN
1
1
9
1. Output Channels 1 & 2
2. Remote Control Channels 1 & 2
3. Input Channels 1 & 2
4. Channel 1 thru Channel 4 Status LEDs
a. Green – Normal Signal Level
b. Amber – Input or Output Overload/
Clipping or Thermal Limiting
c. Red – Limit or Protect Mode
d. Red – Thermal Limit or Protect Mode
e. Red – Mute
1
1 No signal for 10 minutes, amplifier outputs are muted (LEDs are red). No signal for 25 minutes, amplifier is put in Standby Mode (Rear LEDs are off).
TD-000500-00-D
Input Signal Power
Blue – Present Blue – On
Orange – Standby
2 3 4
2 3 4
10 11
5. Channel 1 Attenuator Control
6. Channel 2 Attenuator Control
7. Mode Configuration Switches Channel 1& 2
8. AC Power Connection
9. Output Channels 3 & 4
Limiter / Protect
Red – Protect / Mute
Orange – Limiter on
— Figure 9 —
5 4 6 7
5 4 6 7 4
12 13
— Figure 10 —
6
Input Signal
Blue – Present
4
14
10. Remote Control Channel 3 & 4
11. Input Channels 3 & 4
12. Mode Configuration Switches Channel 3 & 4
13. Channel 3 Attenuator Control
14. Channel 4 Attenuator Control
Power
Blue – On
Orange – Standby
8
8