The Helmet; Standard; Ece-Approval; Anatomy Of The Helmet - SCHUBERTH S1 PRO Gebrauchsanweisung

D. THE HELMET

1. STANDARD

The S1 PRO conforms to the ECE-R 22.05 standard. This test standard
guarantees conformity to defi ned safety standards in respect of
impact absorption, penetration resistance, lateral rigidity, retention
system and fi eld of vision. The approval guarantees that you have
approval for all the countries of the European Union and all countries
which recognise the ECE standard. It also guarantees conformity for
insurance purposes in the event of a claim.
Please note that this S1 PRO with ECE approval is specifi cally
orientated to the ECE standard and is therefore particularly not
approved for the USA or Canada. It is only legal to use it in countries
where the ECE standard is valid.
Note:
The only SCHUBERTH helmets legal for use in the USA or Canada
are those with appropriate approval and technical specifi catio.
Further information and sales outlets for these helmets can be
found on the Internet at:
www.schuberth.com/usa
www.schuberth.com/canada
2. ECE APPPROVAL
ECE-test standard
Approval number
050106/P-3271
62
Approval authorithy
Serial number

3. ANATOMY OF THE HELMET

Visor
Refl ective eyes
Sun visor
Interior lining
Head outlet vent
Visor vent/
chin vent
Wind defl ector/
chin spoiler
4. OUTER SHELL
The outer shell of the S1 PRO combines an aerodynamically optimal
shape that is suitable for racing with thorough protection. It consists
of a special glass fi bre reinforced, duroplastic matrix developed by
Schuberth, which gives the helmet the high level of strength needed for
your protection.
Caution:
The safety helmet is designed to absorb the effect of only one
impact. The helmet must be replaced after a fall, accident or any
other impact.

5. INNER SHELL

For optimised impact absorption properties, the inner shell of the
helmet consists of several components. Complex multi-segment foam
padding of the main body makes for better absorption and distribution
of impact forces and gives you a high degree of protection. The large
side sections ensure the helmet provides optimum fi t and the greatest
comfort.
Head inlet vent
Head inlet/outlet vent
Outer shell
Visor mechanism
Retention system
(with Anti-Roll-Off System)
Inner shell
Operating slide for
sun visor
Chinstrap (with
double D-ring fastener)
63 63