Displaying The World Times - Auriol Z29592 Bedienungs- Und Sicherheitshinweise

2. Press the MODE button
The hour display will flash.
3. Press the RESET
value you wish to have.
4. Press the MODE button
5. Repeat steps 3 and 4 to set the values for minutes and
seconds.
6. Press the ALTI / BARO button
down mode.
7. Press the ST. / STP. button
8. Press the ST. / STP. button
Note: During the last 10 seconds, a signal will sound
every second. When the countdown has finished, a
signal will sound for thirty seconds.
9. Press any button to stop signal. After the signal, the set
countdown time will appear in the display
10. Repeat the previous steps to set another countdown time.
©

Displaying the world times

Note: You can display the times in up to 60 towns around
the world.
Press the MODE button
WT appears in the display
114 GB/MT
down for about 2 seconds.
2
or the ST. / STP.
1
. The minute display will flash.
2
to get back to count-
3
to start the countdown.
4
again to stop the countdown.
4
as often as necessary until
2
.
5
button to set the
4
again.
5