JUNO JH094C9 Benutzerinformation Seite 9

Oven func‐
tion
Pizza Setting
Conventional
Cooking
(Top / Bottom
Heat)
Setting the function:True Fan
Cooking PLUS
This function allows to improve humidity
during the cooking.
WARNING! Risk of burns and
damage to the appliance.
Released humidity can cause burns:
• Do not open the oven door when the
function works.
• Open the oven door with care after the
function stops.
Refer to "Hints and tips"
chapter.
1. Fill the cavity embossment with tap
water.
Application
To bake pizza. To make
intensive browning and a
crispy bottom.
To bake and roast food
on one shelf position.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
CAUTION! Do not refill the
cavity embossment with
water during cooking or
when the oven is hot.
2. Put food in the oven and close the
oven door.
3. Set the function:
4. Turn the control knob to select a
temperature.
5. Turn the knob for the heating functions
to the off position to turn off the oven.
6. Remove water from the cavity
embossment.
WARNING! Make sure that
the oven is cold before you
remove the remaining water
from the cavity
embossment.
9
.