ECG MTD 206 VSS Bedienungsanleitung Seite 58

Installation of the turning plate
Cartridge (underside)
Glass turn-
ing plate
Assembled driving
collar
Axle of the driving collar
INSTALLATION
Remove all packaging material and take out all the accessories.
Check that the oven is not in any way damaged (dented or damaged door, etc.). Do not install the
oven if it is in any way damaged.
Body of the oven: Remove all protective foil from the surface of the oven.
Do not remove the light brown foil which is screwed into the inside of the oven. This foil
protects the oven's magnetron.
Place the oven on an even surface, which guarantees a suffi cient amount of free space for the correct
function of the ventilation openings.
a) Do not block the ventilation openings. The oven could be damaged.
b) Place the oven as far as possible from a radio or television.
The microwave oven can interfere with the signal of the television or radio signal.
Adjustment bolt A:
Plastic frame cover
57
1. Never place the glass turning plate with the bottom
in the upward direction. The glass plate must always
turn freely.
2. Never use the oven without the driving collar and
the glass turning plate.
3. All containers with food must always be placed on
the glass turning plate.
4. If the glass turning plate cracks or the driving collar
is damaged, contact the nearest authorised service.
Bolt B:
EN