Display Menu - Yamaha YSP-1100 Bedienungsanleitung

MANUAL SETUP
INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(TV, STB, DVD, VCR, or AUX) to select the component
you want to change the name for and then perform the
following procedure.
D)INPUT RENAME
DVD ->
p
[ ]/[ ]:Position
[ ]/[ ]:Character
[ENTER]:Return
1
Press / to place the _ (underbar) under
the space or the character you want to edit.
The _ (underbar) flashes.
2
Press / to select the desired character.
• You can use up to 8 characters for each input.
• Press to change the character in the following
order or press
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
3
Repeat steps 1 to 3 to rename each input.
4
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
70
En
DVD
ENTER
to go in the reverse order:
ENTER
ENTER

DISPLAY MENU

Use to manually adjust various parameters related to the
display.
SET MENU → MANUAL SETUP → DISPLAY MENU
4 DISPLAY MENU
. A)DIMMER SET
B)OSD
C)UNIT
[ ]/[ ]:Up/Down
[ENTER]:Enter
DIMMER SET (Dimmer settings)
Use to adjust the brightness of the front panel display.
A)DIMMER SET
. STANDARD
AUTO DIMMER
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display
when you operate this unit by using the control buttons on
the front panel or on the remote control.
Choices: –2, –1, OFF
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period, the
front panel display dims. Use to adjust the brightness of
the front panel display in this case.
Choices: OFF (the same brightness as the STANDARD
DIMMER setting), –1 to –3 (based on the
STANDARD DIMMER setting), DISPLAY OFF
SET
SET
DIMMER;;;;;OFF
;;;;;;;;;;;;;OFF
p