Menu; Menu Configurations; Menu Screen - Yamaha DPX-1300 Bedienungsanleitung

9 Menu

Configure the DPX-1300 to suit your viewing environment by adjusting image quality, initial settings, defaults, and setup characteristics.
These parameters can be accessed through the menu.
Press the MENU button on the remote control or the main unit to display the menu screen. The menu consists of the [Image], [Signal],
[Initial], and [Setup] menu groups, each containing numerous items you can use for configuring the unit. Note that some items are only
selectable for certain types of input signal (Video, Component, RGB TV, RGB PC).
Menu groups appear in the upper area of the display, as the top level of menu composition. Menu items appear in the left area of the display.
You can select settings and make adjustments to suit your preferences. See page 38 - 47 for an explanation of how to use the menu.

Menu screen

Menu group
[Image] selected.
Menu items
Items displayed here depend on
the menu group you select.
The picture on the right shows
menu items in the [Image] group
for example.
Menu operation guide
Displays helpful instructions when
special operations are necessary.
Some menu items contain an additional level of items called a submenu. Moving the cursor to an item with a submenu attached displays " "
to the right of the item name. Some submenus contain further levels of submenus containing items for selection.
Move Menu Window
Image Signal Initial
Black Level 0
White Level 0
Gamma a b
Hue 0
Saturation 100
Sharpness Gain
2
Sharpness Type 2
Color Adjustment Standard
White Peaking 0
Iris
Level Adjustment
+ : Enter Memory 1
In this example, the menu contains three submenus, and one of the submenus contains a further submenu.

Menu configurations

<Example: When in Image menu>
Image Signal
Black Level
White Level
Gamma
Hue
Saturation
Sharpness Gain
Sharpness Type
Color Adjustment
White Peaking
Iris
Level Adjustment
<Display example: [Color Adjustment] item submenu>
Setup
Indicates the existence of a submenu
c d e
6700K + 0.000uv
-
Color Adjustment
[Color Adjustment] submenu
VIDEO
Move Menu Window
Initial Setup
0
0
a b c d e
0
0
2
2
6500K + 0.000uv
WRGB
-
0
Memory 1 VIDEO
Memory number status
Displays the currently selected memory number and memory status. Change
the memory number and lock/unlock memory settings here(
6700K + 0.000uv
Standard
-
6500K + 0.000uv
WRGB
-
6500K + 0.000uv
WRGBYCM
-
[Move Menu Window] area
Use this selection area to move
menu screens. See page 44 for
more information.
Parameter adjustment area
Input jack display area
Shows the currently selected
input jack.
page 48-50).
Move Menu Window
Image Signal Initial
0 6900K + 0.005uv
Color Temp.
–
y
y
0.4
0.35
0.5
+ 0.02uv
0.3
+ 0.00uv
–
- 0.02uv
0.0
0.25
0.0 0.5 x
0.25 0.3 x
Memory 1
: Edit
[WRGB] submenu
9
Setup
0.35
VIDEO
27