Herunterladen Inhalt Inhalt Diese Seite drucken

Menu; Menu Overview - Yamaha DPX-530 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DPX-530:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 80
7

Menu

◆ Menu overview

Menus are not displayed when no signal is received by the projector.
IMAGE
SET UP
INITIAL
SIGNAL
After selecting the items marked with
*1: Not available when sRGB is set to ON.
*2: Setting range differs depending on the input signals.
*3: Refer to the chart below for availability / unavailability.
SATURATION
HUE
SHARPNESS
PROGRESSIVE MODE
COLOR SYSTEM
HORIZ. POSITION
VERT. POSITION
PHASE
TRACKING
D-SUB INPUT
SET UP LEVEL
SYNC NOISE MASK
A/D SETTING
LPF
CONTRAST
BRIGHTNESS
*1
WHITE ENHANCE
sRGB
*1
COLOR TEMP.
*1 *3
SATURATION
*1 *3
HUE
*3
SHARPNESS
*1
GAMMA
KEYSTONE
AUTO POWER ON
AUTO POWER OFF
SPLASH SCREEN
HIDE SCREEN COLOR
LAMP MODE
LOCATION
MENU POSITION
*3
PROGRESSIVE MODE
*3
COLOR SYSTEM
ASPECT
LANGUAGE
RESET ALL
*3
HORIZ.POSITION
VERT.POSITION
*3
*3
PHASE
TRACKING
*3
*3
D-SUB INPUT
SET UP LEVEL
*3
SYNC NOISE MASK
*3
A/D SETTING
*3
, press the ENTER button.
Unavailable when the input source is DVI or the D-SUB source is an RGB signal.
Available only when the VIDEO or S-VIDEO source is an NTSC-M or NTSC-4.43 signal.
Unavailable when the D-SUB or DVI source is a computer signal.
Available only when the input signal is TV50, TV60, 480i or 576i.
Available only when the input source is VIDEO or S-VIDEO.
Unavailable when the DVI source is a computer signal.
Unavailable when the DVI source is a computer signal.
Unavailable when the input source is VIDEO, S-VIDEO or DVI.
Available only when the D-SUB source is a computer signal.
Available only when the input source is D-SUB, except 480i and 576i.
Unavailable when the D-SUB or DVI source is a computer signal.
Unavailable when the input source is VIDEO, S-VIDEO or DVI.
Unavailable when the input source is VIDEO, S-VIDEO or DVI.
Available only when the COMPONENT or D-SUB source is a 480i, 480p, 576i or 576p signal.
0 - 60
± 30
DEFAULT, 0 - 10
ON , OFF
HIGH
CONTRAST R
MID
CONTRAST B
LOW
BRIGHTNESS R
CUSTOM
BRIGHTNESS B
0 - 20
± 10
0 - 10
DEFAULT, DYNAMIC, CINEMA1, CINEMA2
± 20
ON , OFF
OFF, 5, 10, 15, 30, 60 min
ON , OFF
BLUE, BLACK
BRIGHT, CINEMA
FRONT/TABLE, REAR/TABLE, REAR/CEILING, FRONT/CEILING
UPPER LEFT, LOWER RIGHT
AUTO , VIDEO
AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
DEFAULT, NORMAL, SQUEEZE, ZOOM, THROUGH
, ENGLISH, ESPANÕL, DEUTSCH, FRANÇAIS, ITALIANO,
EXECUTE
0 - 999
*2
0 - 999
*2
0 - 31
0 - 9999
*2
RGB, COMPONENT
OFF, 3.5%, 7.5%
ON
OFF
CLAMP POSITION
EXECUTE
CLAMP WIDTH
0 - 60
0 - 60
± 30
± 30
*2
BEGIN
0 - 99
END
0 - 99
0 - 63
1 - 63
LPF
*3
ON , OFF
*2
*2
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis