Turning Off Cinema Dsp Programs; Adjusting Cinema Dsp Effect Levels - Yamaha YSP-1100 Bedienungsanleitung

USING SOUND FIELD PROGRAMS

Turning off CINEMA DSP programs

Turn off the CINEMA DSP programs if you want to enjoy
the original sound without the sound field program effect.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
2
Press OFF on the remote control to turn off
the sound field programs.
CINEMA DSP OFF is shown in the front panel
display.
54
En
YSP
OFF
0
VOL

Adjusting CINEMA DSP effect levels

You can enjoy good quality sound with the factory preset
parameters. However, you can also adjust the effect level
of the CINEMA DSP programs relative to the level of the
direct sound so that each sound field program can reflect
your listening environment and your preference even more
accurately.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
2
Press MUSIC, MOVIE or SPORTS on the
remote control to select the desired sound
field program.
MUSIC
7
or
3
Press / on the remote control.
DSP LEVEL is shown in the front panel display.
4
Press / on the remote control to adjust
the effect level of the CINEMA DSP programs.
Control range: –6 dB to +3 dB
• A larger value increases the effect level.
• A smaller value decreases the effect level.
YSP
MOVIE SPORTS
8 9
or
VOL
ENTER