Using Set Menu; Displaying The Osd - Yamaha YSP-1100 Bedienungsanleitung

USING SET MENU

Displaying the OSD

This section simply describes how to display the OSD (on-screen display) of this unit on your TV screen and set the
parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the
comfort of your own home.
Note
The OSD is not output at the COMPONENT VIDEO OUT jacks of this unit. Connect the VIDEO OUT jack of this unit to the video
input jacks of your TV to display the OSD.
STANDBY/ON
STB VCR
INPUT1
TV
AUTO
VOL MODE SETUP INPUTMODE
5BEAM
1
STEREO
4
MUSIC
7
OFF
0
CH LEVEL
TEST
1
Check that the video input jack on your TV is
connected to the VIDEO OUT jacks of this
unit to display the OSD of this unit.
2
Press STANDBY/ON on the front panel or on
the remote control to turn on the power of
this unit.
STANDBY/ON
Front panel
3
Turn on the power of your TV.
4
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
26
En
USING SET MENU
POWER POWER
AV TV
DVD AUX
TV
INPUT2 MACRO
SLEEP
ST+3BEAM 3BEAM
2 3
MY BEAM SURROUND
5 6
MOVIE SPORTS
8 9
+10
MENU
TV/AV
ENTER
YSP
RETURN
or
Remote control
YSP
5
Press TV on the remote control to display the
OSD of this unit on your TV screen.
It may take a few seconds before this unit's OSD
appears on your TV screen.
If the OSD does not appear, use the remote control
provided with your TV to switch the video input until
the OSD appears.
TV
TV
AUTO:ANALOG
OSD screen example