Making Telephone Calls; Making Internal Calls - TIPTEL DECT Box 5000 CLIP Bedienungsanleitung

NOTE
3

Making telephone calls

Depending on your DECT base station and the setting of your v, you will
either hear the DECT base station dialling tone or the internal DECT Box
dialling tone when you lift the handset of the connected device.
3.1

Making internal calls

Internal phone calls are calls to other cordless phones registered on the
same base station.
Input Function
* * 1
Internal cordless unit 1 is called
* * 2
Internal cordless unit 2 is called
* * 3
Internal cordless unit 3 is called
* * 4
Internal cordless unit 4 is called
* * 5
Internal cordless unit 5 is called
* * 6
Internal cordless unit 6 is called
* * 7
Internal cordless unit 7 is called
* * 8
Internal cordless unit 8 is called
* * 9
Internal cordless unit 9 is called
* * 0 6
Internal hunt group call (if supported by the base
station)
Within the first 10 minutes after the DECT Box is restarted, the key
* * 9
combination
Internal cordless unit 9 cannot be called during this time.
Assuming your DECT base station supports them, the following
functions can be activated by entering various codes. Please observe
the operating instructions for your DECT base station.
Input Function
* * 0 1
+ INT key
* * 0 2
+ R key (flash key)
* * 0 3
+ Pause key
* * 0 4
+ DTMF dial changeover
* * 0 5
+ Pulse dial changeover
can be used to activate programming mode.
15