TIPTEL DECT Box 5000 CLIP Bedienungsanleitung Seite 37

2 Registration / programming
Function
Group ring
The DECT Box responds calls from the base sent as "group ring" calls.
The DECT Box does not respond calls from the base sent as "group
ring" calls.
Factory setting: 0
Set PARK number
As an option, the registration process can be carried out using the
PARK number of your DECT base station (PARK = Portable Access
Rights Key). This can have up to 15 digits.
The procedure is advisable if the registration process cannot be com-
pleted due to other active DECT base stations. Please refer to the
user's guide for your base station for further details about PARK
numbers.
Factory setting: no PARK number set.
Activate PARK/ARI number
The PARK/ARI number set under programming point 80/85 is not
used during the registration process.
The PARK/ARI number set under programming point 80/85 is used
during the registration process.
Factory setting: 0
Set ARI number
Instead of the PARK number (see parameter 80) the ARI number can
be used for subscription. For input of the ARI number use 31 as
prefix.
Factory setting: no ARI number set.
Parameter Other input
code
73
73
80
81
81
13
0 #
1 #
PARK number #
0 #
1 #
85 31 ARI #