Important Information - TIPTEL DECT Box 5000 CLIP Bedienungsanleitung

2
NOTE
Informationen

Important information

The DECT Box is a DECT-standard cordless adapter for universal usage
when operating analogue terminals on GAP-compatible DECT systems.
Essentially a "cordless extension cable", the DECT Box eliminates the
need for complicated cabling work and can be registered on any stan-
dard DECT/GAP base station just like an extra cordless handset. The
DECT Box can be used to connect analogue telephones, fax machines,
answering machines, entrance intercoms and modems to your DECT
base station. The device must use DTMF dialling (voice frequency
signalling); terminals that only support pulse dialling cannot be used on
the DECT Box. If your device uses pulse dialling, please check if it can
also be switched over to DTMF dialling.
The DECT Box 300 features an integrated aerial and has a standard
DECT range of up to 30 m indoors and up to 300 m out of doors.
An external aerial must be connected to the DECT Box 5000. Much
greater distances may be covered, depending on the base station used,
the aerial and the general environmental conditions. By using an external
aerial on the base station or a DECT repeater with an external directional
aerial, a maximum range of up to 10 km can be attained.
To ensure optimal operation on different base stations, it may be neces-
sary to modify the DECT Box by setting various parameters on the base
station. For more information, see the "Programming mode" chapter.
The varying functionalities of different base stations may, in turn, result
in variations in operation. Please observe the instructions for operating
your base station.
The factory setting of the DECT Box is for operation on a base station
with an analogue connection, which means that in many cases it will not
require any further modification. For operation on base stations with an
ISDN telephone connection, you will need to switch over parameter
40 in programming mode.
2