TIPTEL DECT Box 5000 CLIP Bedienungsanleitung Seite 38

2 Registration / programming
Function
Reset DECT Box
The DECT Box is reset to the factory settings. This means, however,
that the DECT Box is no longer registered on a base station. All pre-
vious settings are deleted. After unplugging / plugging in the adapter,
the DECT Box is restarted and reprogramming of the DECT Box can
begin.
Reset parameter
The DECT Box remains registered on the base station; all other
parameters are reset to the factory settings. After entering the para-
meter, replace the handset and wait for 30 seconds. The DECT Box
will be restarted automatically.
Auto Reset
The Auto Reset function is not active.
The Auto Reset function is active, which means the DECT Box will
restart automatically every 24 hours. All settings remain unchanged;
any call present at the time of the reset is disconnected.
Factory setting: 0
Deregister
The base station data is deleted from the DECT Box. All other
settings remain unchanged. After unplugging / plugging in the
adapter, an automatic restart is carried out and the DECT Box can be
registered on a different base station.
Parameter Other input
code
91
92
92
99
14
90 #
#
0 #
1 #
#