Output For An External Signalling Device 24 V Dc (E.g. Signal Lamp) - Wilo Control EC-Fire Einbau- Und Betriebsanleitung

Menu no. / Description
5.66 Integrated alarm buzzer
Values: off, Error, Run
Factory setting: Run
5.67

Output for an external signalling device 24 V DC (e.g. signal lamp)

Values: off, Error, Run
Factory setting: Run
5.68 Rotating field monitoring (mains input)
Values: off, on
Factory setting: on
5.69 Internal motor current measurement
Values: off, on
Factory setting: on
6.01 Alarm acknowledgement
(Changing of the parameter to Reset acknowledges the alarms)
6.02 – 6.11 Fault memory spaces (FiFo – latest fault in 6.02)
The error code is displayed
7.01 Parameter changes possible
Values: off, on
Factory setting: off
Installation and operating instructions Wilo-Control EC-Fire
Menu 6.00: Fault memory
Menu 7.00: Service
Display
English
53