Dialling A Telephone Number Directly From The Caller List; Deleting Numbers From The Caller List; Deleting The Entire Caller List - AUDIOLINE TEL4clip Bedienungsanleitung

When all newly recorded numbers have been checked, the
"NEW CALL" LED goes off and the "NEW" indicator in the
display shows "0".
If no button is pressed within 20 seconds, the caller list is no
longer displayed and the display shows the current time and
date once more along with the number of telephone
numbers stored in the caller list and the number of newly
stored telephone numbers.
The display reports the following information when there is
no telephone number available.
If the message "Error" appears in the display, the number
has only been partially or incorrectly received.
If the message "Not available" appears in the display, the
telephone number information is not available. This could
have been an international call.
If the message "Private" appears in the display, the caller
has suppressed the transmission of his telephone number
or it was not possible to transmit the number.
4.2 DIALLING A TELEPHONE NUMBER DIRECTLY
FROM THE CALLER LIST
You can dial telephone numbers directly that have been
stored in the caller list.
1. Either lift the receiver or leave it on the rest.
2. Select the required telephone number using the
and
3. Now press the
will be dialled directly. Lift the receiver if you have not
already done so.

4.3 DELETING NUMBERS FROM THE CALLER LIST

1. Select the telephone number that you want to delete
from the caller list using the
2. Now press the
be deleted.
4.4

DELETING THE ENTIRE CALLER LIST

Press the
show the message "NO CALLS" and the entire caller list will
be deleted.
buttons.
button and the telephone number
button twice and the number will
button for 3 seconds. The display will
20
and buttons.