Viewing The Caller List; Store Location In The Caller List Currently Selected; Dialling A Telephone Number Directly From The Caller List - AUDIOLINE TEL38CLIP Bedienungsanleitung

6.1

Viewing the caller list

Before using the caller list, the CLIP caller list function must be switched on. You
can be switched between the phone book and the caller list with the CLIP button.
Therefore make sure that the display message CLIP is on. You can page through
the caller list using the Jogdial. All calls registered will be shown as follows:
Number has
been newly
registered
When you reach the last storage location in the list, the display will show the
message ENDE DER LISTE.
Note!
When all newly recorded numbers have been checked, the new call indicator light
goes off and the NEW indicator in the display shows "0".
If no button is pressed within 60 seconds, the caller list is no longer displayed and
the display shows the current time and date once more along with the number of
telephone numbers stored in the caller list and the number of newly stored
telephone numbers.
6.2 Dialling a telephone number directly from the caller
list
You can dial telephone numbers directly from the caller list.
1. Select the required telephone number using the Jogdial.
2. To dial the number, press the
switched on automatically and the number will be dialled.
3. If you want to change to using the receiver, simply lift the receiver.
Note!
Before dialling, your telephone compares the country and local dialling codes of
the number selected with your location (country + local dialling code). If you have
entered your country and local dialling code during installation, the appropriate
numbers will not be dialled if this is a number from within your country or local
network.
- Caller display (CLIP) -
Time/date of call
NEW 11:43 16/1
CLIP
01234/56789
08
ENTER
button. The handsfree facility will be
Store location in
the caller list
currently selected
37