Removing The Front Wheel - Swm Rs 300 R Handbuch

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that
the front wheel is lifted from the ground.
SM: remove the two screws (A) and the brake cal-
liper.
SM - RS: Loosen the bolts (1) holding the wheel axle
(2) to the front fork mounts. Hold the head of the
wheel axle in place, and unscrew the bolt (3) on the
opposite side; draw the wheel axle out.
Note*: Do not operate the front brake lever when
the wheel has been removed; this causes the calliper
pistons to move outwards. After removal, lay down
the wheel with brake disc on top.
2
A
1
1
3
EN - 43