Manufacturer; Package Contents; Technical Data; General Notes - Scheppach HSC130 Original Bedienungsanleitung

1. Manufacturer

scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
D-89335 Ichenhausen

2. Package contents

Block splitter with upper and lower blades
Extension bar for cutting lever

3. Technical Data

Model
Maximum cutting width
Minimum cutting height
Maximum cutting height
Adjustment of cutting height
Weight
Technical changes reserved

4. General notes

1. After unpacking, check all parts for possi-
ble transport damages. In the case of com-
plaints, the carrier must be notified at once.
2. Later claims are not recognized.
3. Check the delivery for completeness.
4. Familiarize yourself with the machine by
means of the operating instructions prior to
installation.
5. For accessories as well as expendable and
replacement parts, use only original parts.
Obtain replacement parts from your
dealer.
6. When ordering, give our article numbers
as well as the type and model year of the
device.
16 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Note:
According to the applicable product liability law,
the manufacturer of this device is not liable for
damages occurring to or through use of this de-
vice in the case of:
• improper handling,
• failure to observe the operating instructions,
• repairs by unauthorized specialists,
• installation and exchange of replacement
parts that are not original, inappropriate use.
We recommend:
Before installation and startup, read the en-
tire text of the operating instructions.
HSC130
These operating instructions should make it
330 mm
easier to familiarize yourself with your machine
26 mm
and to use its intended installation options.
The operating instructions contain important
140 mm
notes on how to work with the machine safely,
manual
correctly and economically and on how to avoid
39,5 kg
danger, save repair costs, minimize downtimes
and increase the reliability and operating life of
the machine.
In addition to the safety requirements of these
operating instructions, it is absolutely impera-
tive that you observe the laws of your country
that apply for the use of the machine.
Store the operating instructions, in a plastic
sleeve protected against dirt and moisture,
by the machine. They must be read by every
operator before beginning work and observed
carefully.
The only people who may work at the machine
are those who have been trained in the use of
the machine and instructed regarding the dan-
gers connected with it. The required minimum
age must be observed.
In addition to the safety instructions in this op-
erating manual and the separate regulations of
your country, the generally recognised techni-
cal rules for operating woodworking machines
must also be observed.