Technical Data; Safety Instructions - FLORABEST FRTA 20 A1 Originalbetriebsanleitung

GB IE
The appliance also features a pivoting mo-
tor head, adjustable aluminium telescopic
shaft, and a spacer bow. A hood covering
the cutting device protects the user.
Refer to the following descriptions for a
functional description of the controls.

Technical data

Cordless Grass Trimmer FRTA 20 A1
Motor voltage (U) ..................... 20 V
Idling speed ...............8000 min
Protection Class ............................... III
Protection category ...................... IP20
Runtime ..........................max. 45 min*
Cutting circle ..........................250 mm
Weight (without battery charger) 2.15 kg
Sound pressure level
(L ) ............... 78.6 dB (A), K
pA
Sound power level (L
guaranteed ....................... 96 dB (A)
measured .. 89.8 dB (A); K
Vibration (a )
h
upper handle . 2.65 m/s
additional
handle .......... 3.11 m/s
Battery (Li-Ion) ............... FAP 20 A2
Number of battery cells .....................5
Nominal voltage ...................... 20 V
Capacity ..................................2.0 Ah
Charging time ................... approx. 1 h
Charger ......................... FLG 20 A2
Nominal consumption ................. 65 W
Uptake voltage/
Input ..................... 230-240 V~, 50 Hz
Voltage output/
Output .......................21.5 V
Protection class ............................
Protection category ...................... IP20
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
26
(rpm)
-1
= 3 dB
pA
)
WA
=2.51 dB
WA
; K=1.5 m/s
2
; K=1.5 m/s
2
, 2.4 A
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity. The vibration and noise meas-
uring processes in accordance with EN
50636-2-91, were completed successfully.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
2
which the power tool is used.
Try to keep the exposure to vibra-
2
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions
II
are observed when operating the
trimmer.