Residual Risks - FLORABEST FRTA 20 A1 Originalbetriebsanleitung

GB IE
PREPARATION
• Before each use, carry out a visu-
al inspection on missing or wron-
gly mounted protective devices or
parts of the cutting device.
• Before commissioning and after
any impacts, check for signs of
wear and damages, and have
any necessary repairs performed.
OPERATION
• Wear safety goggles, stable
shoes and long trousers over
the entire period of use of the
machine.
• The use of the machine under
bad weather conditions, espe-
cially in case of lightning risk,
must be avoided.
• Warning! Do not touch any mo-
ving dangerous parts before the
battery has been removed and
the moving dangerous parts
have come to a complete stop.
• Caution, risk of injury from cuts
on hands and feet.
• Stop using the machine when
persons, above all children, and
house pets are in the vicinity.
• Use the machine only in daylight
or with good artificial lighting.
• Always keep your hands and
feet away from the cutting
equipment, above all when you
switch the motor on.
• Never install metallic cutting
elements.
• Never use the machine with
damaged or missing protective
equipment.
• Avoid an abnormal body po-
sture. Ensure secure footing at
all times to maintain balance
when working on slopes.
32
• Go slowly. Do not walk with the
device in your hand.
• Always wear sturdy shoes and
long trousers during operation
of the machine.
• In the case of an accident
or malfunction during
operation, the device must
be switched off immedia-
tely. Injuries must be pro-
perly treated or medical
assistance sought. Read
the „Trouble shooting" section
to correct any malfunctions or
contact our Service Centre.
MAINTENANCE AND STORAGE
• Remove the removable battery
before carrying out mainte-
nance or cleaning work.
• Use only spare parts and acces-
sories supplied and recommen-
ded by the manufacturer.
• The machine must be checked
regularly and maintained. Have
the machine repaired in a licen-
sed workshop.

Residual risks

Even if properly operating and han-
dling this electric tool, some residual
risks will remain. Due to its construc-
tion and build, this electric tool may
present the following hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.