BADU Alpha Eco Soft Bedienungsanleitung Seite 18

1
Power
BADU Pool technologies and solutions.
1
Power
BADU Pool technologies and solutions.
EN 18
GREEN
SET
2 3
OK
0
Error
GREEN
SET
2 3
OK
0
Error
Setting the priming parameters:
The motor has to be stopped ("0"
button) to programme the priming
time. Then press the "SET" button
again for at least 3 seconds until the
performance displayed in the display
begins to flash. Now the performance
with which the motor is to start up
during the priming time can be set.
The performance can be changed
with the buttons "▼ ▲" and saved
with "OK". After the priming capacity
has been set, the length of the
priming time can be specified. The
priming time can be set between 0
(=Off) and 10 minutes.
Resetting:
The motor can be reset to the state
of delivery by pressing the "SET"
button for at least 15 seconds. The
motor stops and the three LEDs of
the performance levels light up.
08|2017