Auerswald COMfortel 2600 Betriebsanleitung Seite 15

• To avoid injuries, do not put the receiver down close to such objects.
Warning: Danger of suffocation. The device contains small parts
which infants or small children might swallow.
• Keep the device out of reach of children.
Important: The device is not designed or intended for use in life-support
systems and/or nuclear facilities. The device can only be used for these
purposes with prior written permission/clarification from the manufacturer in
each individual case.
Improper use may, for example, cause functional restrictions or
malfunctions, the destruction of the device or, in a worst case scenario,
personal injury.
If you are still uncertain about how to use the product properly after reading
the section below, please contact your specialised dealer.
• Read the manuals for the device and keep them for future reference.
• Some of the functions require activation by the network provider, a
firmware update and/or configuration via COMfortel Set.
Proper Use
System telephone for connection to the internal S
supplied by Auerswald/FONtevo (see Technical Data). There is no provision for
connecting to another manufacturer's PBX or to a network provider's external
S connection. The telephone is corded, and is intended for use in closed, dry
0
rooms.
Technical Data
Operating voltage
Wall-mounted
power supply
Power
consumption
System connection Internal S
PC/data interface
Power via the internal S
With COMfortel Xtension300: Power provided via
wall-mounted power supply at 230 V ~; +/- 10 %,
50 Hz
Type no. FW7577/EU/40
Min. 1.1 W, max. 1.9 W; COMfortel Xtension300:
+0.6 W
port or U
0
PBXs: COMpact 3000 analog/ISDN/VoIP,
COMpact 2206 USB, COMpact 4410 USB,
COMpact 5010 VoIP, COMpact 5020 VoIP,
COMpact 4000, COMpact 5000/R, COMpact 5200/
R, COMpact 5500R, COMmander 6000/R/RX.
COMmander Basic 2/19", COMmander Business/19"
USB
or U
0 P0
or U port from the PBX.
0 P0
port from one of the following
P0
port on a PBX